JTY-GD-S830 Container Smoke Sensor / Battery Swap Station Smoke Detector / CCCF Smoke Detector
Contact Info
- Add:No. 47 Qiankeng Road, Fucheng Street, Longhua District, Shenzhen, Zip: 518000
- Contact: 陈诚
- Tel:0158-89370119
- Email:2315426052@qq.com
Other Products
JTY-GD-S832Container Smoke Sensor / Battery Swap Station Smoke Alarm / CCCF Smoke Detector
I. Overview:
The JTY-GD-S832 type point-type photoelectric smoke fire detector (hereinafter referred to as the detector) adopts a non-polarity power input, which can detect smoke generated during a fire and send an alarm signal in a timely manner. The detector is equipped with CPU control, enabling intelligent judgment of the smoke concentration generated during a fire. When the detector is in the monitoring state, the red indicator light flashes with a low operating current; when the on-site smoke concentration exceeds the set alarm threshold, the detector enters the alarm state, the red indicator light stays on, and the relay operates simultaneously. The detector is equipped with a relay dry contact output, the alarm signal is given in the form of changes in the relay contact action, and it has an alarm locking function, and the alarm can only be reset by a short power outage. The detector has an automatic dust accumulation compensation function, which can reduce the impact of dust on the detector's sensitivity. The detector is suitable for places where a large amount of smoke is generated during a fire but no smoke is present under normal conditions,
such as: communication stations, substations, oil production platforms, private generator rooms, stations along railways, computer network centers, high and low voltage switchgears, box-type substations, cable tunnels (interlayers, shafts), large equipment power cabinets, wind turbine nacelles and transformer cabinets, flammable cargo holds, electronic data libraries and other relatively enclosed and narrow spaces; it is not suitable for places where steam
and oil mist may be generated; it is not suitable for places where smoke remains under normal conditions.
II. Features and Technical Specifications:
1. Execution Standard: GB4715-2005
2. Operating Voltage: DC12V/24V (Allowable Range: 9V~30V)
3. Operating Current: Monitoring State ＜1mA@DC12V ＜5mA @DC24V
Fire Alarm ＜30mA@DC12V ＜35mA @DC24V
4. Relay Output: Normally Open (Closed After Fire Alarm), Contact Capacity: 1 A 30VDC
5. Operation Indication: Monitoring State: Red indicator light flashes approximately once every 6 seconds;
Alarm State: Red indicator light stays on;
Fault State: Red indicator light flashes twice continuously approximately every 6 seconds
6. Operating Environment: Temperature: -10℃～+65℃,
Relative Humidity: ≤95% (40℃±2℃, No Condensation)
7. External Dimensions: 75mm×51.8mm×38.5mm (With Base),
8. Weight: Approx. 80g
9. Standard Packaging Quantity: 100 units/box
10. Installation Height: ≤12m
11. Protection Area: Refer to GB50116-98 "Code for Design of Automatic Fire Alarm Systems"
All products have complete fire protection certifications, welcome to inquire by phone. www.szhsj119.com
Shenzhen Hongsheng High-Tech Electronics Co., Ltd.
Contact Person: Mr. Chen Cheng
Phone: 【15889370119】 (WeChat Same Number)
| Industry Category | Electronic Components & Supplies/Sensors/Displacement Sensors |
|---|---|
| Product Category | |
| Brand: | 宏盛佳 |
| Spec: | JTY-GD-S832 |
| Stock: | 1000000 |
| Manufacturer: | 深圳市宏盛高科电子有限公司 |
| Origin: | 114403 |
